OxyWatch, fingertip oxygen monitor
Features
- OxyWatch, an oxygen meter at your fingertips can measure both blood oxygen saturation
(SpO2) and heart rate (PR) - OLED screen displays SpO2, PR, Pulse bar, Wave form.
- Displays 6 measurement results.
- Adjust the brightness of the screen to 10 levels, usually at level 4.
(Adjust the brightness Press and hold the on/off switch) - Auto power off in 8 seconds when not in use.
- Warning when the battery is low
- Show O2 value between 70-100% SpO2 Pulse between 30-250 times / minute
- Measurement accuracy (% SpO2 range 70-100% 2 times/min)
(Pulse 30-99 times/minute, 2 times/minute) (100-250 times/minute, 2 times/minute) - Uses 2 AAA alkaline batteries.
- Machine size 1.34 x 1.26 x 2.28 inches
- Light weight, about 50g (including battery)
- There is a neck strap and a carrying bag.
- Product : China
Product details
Symbols on the screen
- Altitude shows the heartbeat
- Blood oxygen saturation
- heart rate
- low battery alert
- The waveform shows the heartbeat.
How to use
- Slide the battery cover in the direction of the arrow. Insert 2 AAA batteries to match the terminals.
- Put your finger in the rubber grille of the machine. with the nail surface on top and insert your finger to the end
- Press the button on the front of the screen.
- Do not move your fingers and your body while the machine is in operation.
- read the value from the screen
- The screen can display 6 different values.
- When the switch is pressed for a long time (more than 1 second), the brightness will be adjusted.
- There are 10 brightness levels, with the set value being level 4.
Caution
- Use a cotton swab moistened with alcohol. Wipe the silicone inside.
- When alert “Battery low” should replace a new battery. If not used for a long time, the charcoal should be removed.
Reviews
There are no reviews yet.