HuBDic-ThermoScan FS-300

Description

HuBDic-Thermoscan FS-300

HuBDic-Thermoscan FS-300

Features

• HuBDic-ThermoScan FS-300 can measure temperature on the front.
  Can be done without the machine touching the body
  By holding the device about 2-3 centimeters away from your forehead.
  It takes less than 2 seconds to read the value.
• Displays measurement results as digital numbers (LCD) and can be selected
  Temperature units are degrees Celsius (◦C) or degrees Fahrenheit (Fahrenheit).
  Rainheit (◦F) is also possible.
• The display is bright (black-light) showing the value after 3 seconds of reading the result.
• It has a memory for recording temperatures (or measurement results) up to
  32 values
• Compact size, easy to hold, and weighs only 120 grams, not including
  Docking station and battery

Product details

• It is a device for measuring body temperature and the temperature of the environment.
• Body temperature can be measured in the range of 0-42.5 ◦C (93.2-108.5 ◦F).
• with an accuracy of 2 ◦C.
• Can measure environmental temperature (wide temperature) in the range of 15-16 ◦C.
  (59-140 ◦F) Accuracy at 2 ◦C.
• Environment temperature when measuring 15-40 ◦C Relative humidity below 95%
• Storage temperature in the range of -20-50 ◦C.
• It has a temperature resolution of 1 ◦C (or 0.1◦F).
• Powered by DC 3V batteries (2 AAA 1.5V Batteries)
• Machine dimensions 4 x 41.8 x 103.1 millimeters
• There is an alarm. Can set to turn off the alarm while working
• It is a product from Korea that is produced under GMP standards.
  ISO 9001, ISO 13485, CE0120, FDA

How to use

• body temperature measurement

1. Press the Start button once.

– The device turns on. After about 2 seconds, the screen will show that the device
Ready to use

– The device will always turn on with body temperature mode.

2. Hold the device 2-3 cm away from the temperature measuring point.

– The best temperature measurement point is the temple area.

3. Press the Start button once.

– Hold the unit until you hear a beep indicating the temperature measurement is complete.

– If the device is in mute mode. Hold the device for about 2 seconds.

4. Read the measured temperature on the display screen.

• measuring the temperature of an object

1. Press the Start button once.

– The machine starts working after about 2 seconds, the screen will show that the machine
Ready to use

– The device will always turn on with body temperature measurement mode.

2. Press the Mode button once.

– The device will switch to the general surface temperature measurement mode.

3. Hold the device about 2-3 centimeters from the point you want to measure.
4. Press the Start button once.

– Hold the unit until you hear a beep indicating that the temperature measurement is complete.

– If the device is in mute mode Hold the device for about 2 seconds.

5. Read the measured temperature on the display screen.

– Values obtained from general surface temperature measurements are not recorded.

6. Surface and internal temperatures may vary.

• Temperature measurement record display

1. Press the Start button once.

– The device turns on. After about 2 seconds, the screen will show that the device
Ready to use

2. The unit will display the last 32 measured temperatures.
3. Press the MEM record button once.

– Displays the last measured temperature value.

4. If the MEM record button is pressed again, the display will display the last measured temperature value.
   Go to the oldest temperature value

– The device will switch to body temperature measurement mode after 30 seconds.

5. The measured temperature will be recorded only when it is in body temperature measurement mode.

Caution

• Do not store in a place exposed to direct sunlight, high temperature, high relative humidity.
• Avoid dropping and keep tools away from children.
• If there is sweat, the temperature measurement point should be behind the ear because there will be sweat.
  Less than the temple area

 

 

Shop for good health 24 hours a day.

LINE OA @HealthyMax